HP Insight Control Software for Linux - Manual (Page 20)

Virtual media does not use DHCP. The system boots a custom RAM disk that includes the
predefined network configuration information (for example. the IP address, Net Mask, Gateway,
and so on).
Insight Control for Linux provides tools that let you define the network information parameters,
edit those network parameters, and initiate bare-metal discovery.
1.11 Managed system names
Insight Control for Linux command line commands recognize managed systems by the following
name types.
Description Managed system name type
The name assigned to the managed system when the Linux OS was installed on it, if
a name was assigned.
HP SIM recognizes managed systems by this host name .
Host name
The managed system host name with the domain name appended, for example,
earth.example.com
. In this document, example.com is the domain name used in
command and screen examples.
Fully qualified host name
The internal name Insight Control for Linux assigns to a managed system. The Insight
Control for Linux name naming convention is {collection name}{0–9999}, where:
• collection name is the Insight Control for Linux default or user-defined name
you assigned as the collection name during the Insight Control for Linux installation
process.
• 0–9999 is a number that is arbitrarily assigned to the managed system during the
Insight Control for Linux installation process. Numbers are assigned sequentially.
For example, if the collection name is icelx, the Insight Control for Linux internal
names are icelx1, icelx2, icelx3, and so on.
For a description of how internal names can change when managed systems are added
to or removed from the Insight Control for Linux collection, see
Section 1.11.1 (page 20)
Insight Control for Linux
internal name
1.11.1 How Insight Control for Linux assigns node names
Insight Control for Linux internal names are assigned when you configure or reconfigure
management services through the following menu item:
Options
→IC-Linux→Configure Management Services
This task creates a nodenumbers file which stores the associations of managed systems to their
internal name. The location of this file is /opt/hptc/database/etc/collection_name,
where collection_name refers to the Insight Control for Linux collection for the managed
systems.
In general, if you add new managed systems to the Insight Control for Linux collection, the new
managed systems are assigned with the next available name. For example, if the internal names
icelx1
, icelx2, and icelx3 are already assigned to three managed systems, the new managed
system is assigned the internal name icelx4, and so on. If a managed system is removed from
the collection, its internal name is not reused unless it is for the same managed system when it
is added back.
You can influence internal node numbering by understanding and editing or creating the
/opt/hptc/database/etc/collection_name/nodenumbers
file, where collection
refers to the collection for the managed systems. The internal node name is generated by
concatenating the name of the collection and the node number.
20 Using Insight Control for Linux