HP Insight Control Software for Linux - Manual (Page 196)

--------------------------------------------------------------------------------
icelx1 |192.0.2.1 |earth |earth.example.com |192.0.2.7 |ILO2
icelx2 |192.0.2.2 |neptune |neptune.example.com |Unknown |Unknown
icelx3 |192.0.2.3 |saturn |saturn.example.com |192.0.2.8 |ILO2
icelx4 |192.0.2.4 |mercury |mercury.example.com |192.0.2.9 |ILO2
icelx5 |192.0.2.5 |192.0.2.5 |192.0.2.5 |Unknown |Unknown
icelx6 |192.0.2.6 |pluto |pluto.example.com |192.0.2.11 |dl1v3
The shownode info --admin command displays a list of managed systems and includes the
management processor user name and password.
21.2.3 Using the shownode virtual command
Run the shownode virtual command to list virtual machines: the format of the output is the
internal name of the virtual host followed by the name of the VM guest; there is one line of output
for each VM guest.
# shownode virtual
icelx2: vm001
Using the option --realnames replaces the internal name of the virtual host (VM host) with
its host name:
# shownode virtual --realnames
neptune: vm001
Another option to the shownode virtual command is --forhost, which limits the display
to a given VM host.
21.2.4 Using the shownode metrics command
The shownode metrics command enables you to monitor the status of managed systems.
Specific arguments to the shownode metrics command enable you to display and monitor
the following items:
• cpus
• cputotals
• load
• memory
• paging
• sensors
• swap
196 Using the command line to view managed system status