HP Insight Control Software for Linux - Manual (Page 141)

a group of servers to have different firmware versions from the rest. Insight Control for Linux
has a simple and flexible method for controlling this.
12.3.1 Understanding the firmware configuration file
A firmware configuration file controls the advanced firmware update features of Insight Control
for Linux. It is a plain text file you create and store in the Insight Control for Linux repository at
the following location:
/opt/repository/firmware/firmware-config.txt
When a server initiates an Insight Control for Linux firmware update, it checks for the presence
of this file in the repository. If the file does not exist, a normal firmware update is performed as
described in the
Section 12.2 (page 138) . If the file is found, it is scanned for a reference to the
server being updated. If a reference is found, it is acted upon.
The configuration file contains one line for each server requiring customized firmware. Each line
has the following format:
system=firmware-filename
Where
system Is one of the following:
1.
A host name
2. An IP address
3. A MAC address
4. The text string default
These system values are given in precedence order, from highest to
lowest.
firmware-filename Is one of the following:
•
The name of a firmware tar file located in the firmware
repository that was customized as described in
Section 12.2.6
(page 139) to have only the particular firmware and versions you
want for this system.
• The reserved word skip, which indicates not to update this
system's firmware.
When the configuration file is scanned for a match to the server, the firmware-filename is
assigned to the server defined by the system value or, for the reserved word skip, the server's
firmware is not updated.
If the same server is described two or more times in the file, the precedence of the system value
determines the action. For example, in the following excerpt, all three lines describe the same
server, but the firmware.tar file (and only that file) is assigned because the server is described
by its host name, which has the highest precedent:
172.31.64.99=prodfirmware.tar
server1=firmware.tar
01:00:ab:67:45:ff=latest-firmware.tar
IMPORTANT: Ensure that system values are unique in the file. For example, there should not
be two identical MAC addresses in the same configuration file.
Wildcards are not supported in the configuration file.
MAC addresses are case insensitive and must be separated by colons (:).
12.3.2 Example firmware configuration files
The following are examples of configuration files:
12.3 Advanced firmware update functionality 141