HP Hitachi Dynamic Link Manager Software - Manual (Page 91)

HiCommand ® Dynamic Link Manager (HDLM) for Windows ® Systems User’s Guide 75
3.5.2.8 Setting the Trace Level
The trace output level can be set.
A trace file in which a trace level can be set is hdlmtrn.log (n indicates a file number
from 1 to 64).
Table 3.13 lists and describes values for the trace level setting.
Table 3.13 Trace Level Setting Values
Value* Description
0: Do not output any trace No trace is output.
1: Error information only Only error information is output.
2: Summary of program operation Program operation summaries are output.
3: Details of program operation Program operation details are output.
4: All information All information is output.
*For the dlnkmgr command's set operation, specify a number such as 0 or 1 .
If an error occurs, you may have to set the trace level to 1 or higher to collect the log
information.
The higher this value is set, the more log information will be output. When the output log is
large, it takes less time to overwrite the old error log information with the new information.
„
Setting by using the Options window
Select Trace level from the pull-down list box.
„
Setting by using the set operation
The following is an example command to set the trace level.
>dlnkmgr set -systflv 1
Specify the trace level in a number.