HP Hitachi Dynamic Link Manager Software - Manual (Page 350)

334 Chapter 9 Messages
9.8 HDLM Management Target Messages
Message ID Message Details and Actions
KAPL08019-E The path ( aa...aa ) detected an error
( bb...bb ). ( cc...cc )
Details
An error occurred in the path because of a
condition such as a disconnection.
aa...aa : Path identifier (hexadecimal number)
bb...bb : Error code (hexadecimal number)
„
When a path error was detected by path health
checking or an online operation
0x000F0000(Fixed) is displayed.
„ When the path error was detected through an I/O
error
The OS error code is displayed.
cc...cc : Address of the filter driver in which the
error occurred (character string)
Action
Check the path in which the error was detected.
KAPL08022-E A path error occurred. ErrorCode =
aa...aa , PathID = bb...bb , PathName =
cc...cc . dd...dd . ee...ee.ff...ff ,
DNum = gg...gg , HDevName = hh...hh
Details
A physical or logical error occurred in the path.
aa...aa : operating system error code
(hexadecimal number)
„ When a path error was detected by path health
checking or an online operation
0x000F0000(Fixed) is displayed.
„ When the path error was detected through an I/O
error
The OS error code is displayed.
bb...bb : Path ID (same as PathID of view -
path ) (decimal number)
cc...cc : Host port number (same as PathName
of view -path ) (hexadecimal number)
dd...dd : Bus number (hexadecimal number)
ee...ee : Target ID (hexadecimal number)
ff...ff : HLU number (same as PathName of
view -path ) (hexadecimal number)
gg...gg : Dev number (same as DNum of view -
path ) (decimal number)
hh...hh : Host device name
Action
The path may have a problem. For details on the
action to be taken, see section 5.3 and switch the
path shown in the message to Online.