HP Hitachi Dynamic Link Manager Software - Manual (Page 216)

200 Chapter 6 GUI Reference
Table 6.8 Model IDs and Model Names of Corresponding Storage Systems
Model ID Model Name of Storage System
9200 Thunder 9200
9500V Thunder 9500V Series
9910/9960 Lightning 9900 Series
9970/9980 Lightning 9900V Series
AMS TagmaStore AMS
SVS SVS
USP „ Hitachi TagmaStore Universal Storage Platform 100
„ Hitachi TagmaStore Universal Storage Platform 600
„ Hitachi TagmaStore Universal Storage Platform 1100
„
Hitachi TagmaStore Network Storage Controller NSC55
USP_V Hitachi Universal Storage Platform V
XP128 XP128
XP1024 XP1024
XP10000 XP10000
XP12000 XP12000
XP24000 XP24000
Emulation Type: When using the TagmaStore AMS/WMS series, Thunder 9500V Series, or
Thunder 9200, this column displays the product ID of the storage systems. When using the
Lightning 9900V Series, or Lightning 9900 Series, TagmaStore USP, or Universal Storage
Platform V this column displays the emulation type of the storage systems. For command
devices, "-CM" is added to the end of the product ID or the emulation type of the storage
system (for example, DF600F-CM).
LUN: This column displays the LU numbers within the storage system. This number combined
with the storage system name (indicated in System) identifies the LU that is accessed by a
path. In the case of the Lightning 9900V Series, Lightning 9900 Series, TagmaStore USP, or
Universal Storage Platform V the first two characters of the LUN indicate the CU (Control
Unit) number, and the last two characters indicate the internal LU number within the CU. In
the case of the TagmaStore AMS/WMS series, Thunder 9500V Series, or Thunder 9200 Series,
the entire LUN is the internal LU number within the storage system. You can physically
specify an LU by referencing the LUN from the storage system management program.
SLPR: This column displays the SLPR number to which the LU belongs. A decimal value from
0 to 31 is displayed. If the target LU exists in a storage system where storage logical
partition functionality is not supported, a hyphen (-) is displayed.
CHA: This column displays the port numbers of the channel adapter. This number identifies
the CHA that is mounted on the storage system. You can physically specify a CHA by
referencing this number from the storage system management program.