HP Hitachi Dynamic Link Manager Software - Manual (Page 240)

224 Chapter 7 Command Reference
7.6 The Set Operation
The dlnkmgr command's set operation sets the HDLM operating environment.
7.6.1 Format
To set up the HDLM operating environment:
dlnkmgr set {-lb {on [-lbtype {rr|exrr}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl check-interval]|off}
|-afb {on [-intvl check-interval]|off}}
|-iem {on [-intvl error-monitoring-interval]
[-iemnum number-of-times-error-is-to-occur] | off }
|-lic
|-rmlu {on [-force ]|off}}
[-s]
To display the format of the set operation:
dlnkmgr set -help
7.6.2 Parameters
7.6.2.1 Setting Up the HDLM Operating Environment
Table 7.2 shows the defaults and recommended values for each setting. If you change the
value of the set operation, the new value takes effect immediately.
Table 7.2 Default and Recommended Values
Item Name Default Value Recommended Setting
Load balancing on
Algorithm is round robin
on
The recommended algorithm depends on the
operating environment.
Error log collection level 3 : Collect error information for the
Information level and higher.
3 : Collect error information for the Information
level and higher.