1 overview of the hdlm command (dlnkmgr), Command format, Operations of the dlnkmgr command – HP Hitachi Dynamic Link Manager Software User Manual
Page 230
214
Chapter 7 Command Reference
7.1 Overview of the HDLM Command (dlnkmgr)
This section describes how to specify the HDLM command dlnkmgr and its subcommands
(called operations in HDLM). Note that messages might refer to this command and the
operations as the HDLM command.
Command format
Enter the command using the following format:
dlnkmgr operation-name [parameter [parameter-value]]
Command values include the following:
The command name is dlnkmgr.
The type of operation entered after dlnkmgr is operation-name.
A value required for an operation is indicated by parameter.
A value required for a parameter is indicated by parameter-value.
Operations of the dlnkmgr command
Table 7.1 shows the operations of dlnkmgr and their functions.
Table 7.1
Operations of the dlnkmgr Command
Operation Functions
clear
Initializes(0) the statistics (I/O count and I/O errors) of all paths managed by the HDLM system. For details,
see section 7.2.
help
Displays the format of the operation used for HDLM. For details, see section 7.3.
offline
Places offline an online path or paths. For details, see section 7.4.
online
Places online an offline path or paths. For details, see section 7.5.
set
Sets the HDLM operating environment. For details, see section 7.6.
view
Displays HDLM program information, path information, LU information, and HDLM management-target
device information. For details, see section 7.7.
Note: Execute the command as a member of the administrators group.
To specify a value containing a space in a parameter, enclose the entire value in double
quotes (").