HP Hitachi Dynamic Link Manager Software - Manual (Page 85)

HiCommand ® Dynamic Link Manager (HDLM) for Windows ® Systems User’s Guide 69
3.5.2 Setting HDLM Functionality
The recommended and default values for the HDLM functionalities are shown below in Table
3.10.
Table 3.10 Recommended and Default Values for Each Function
Functionality Default Value Recommended Value
Load-balancing ON
Algorithm is round robin
ON
The recommended algorithm depends on
the operating environment.
Path health checking ON
30-minute check interval ON
The recommended checking interval
depends on the operating environment.
Automatic failback OFF OFF
Intermittent Error Monitor OFF OFF
Remove LU OFF The recommended value depends on the
operating environment.
Logging level 3: Collect all information for errors with the
level "Information" or higher
3: Collect all information for errors with the
level "Information" or higher
Trace level 0: Do not output a trace 0: Do not output a trace
File size (for Error log) 9900 (KB) 9900 (KB)
Number of files (for Error log) 2 2
File size (for Trace) 1000 (KB) 1000 (KB)
Number of files (for Trace) 4 4
For the dlnkmgr command's set operation, enter lower-case characters such as on and off , instead of ON and OFF , as
shown in the table.