HP Hitachi Dynamic Link Manager Software - Manual (Page 338)

322 Chapter 9 Messages
Message ID Message Details and Actions
KAPL04008-E Cannot open the option definition file
( aa...aa ).
Details
HDLM manager cannot start normally (unable to
open the option definition file).
aa...aa : Option definition file name
Action
Check whether another program is using the file
(or has opened the file with Notepad), or whether
the file has been deleted inadvertently.
KAPL04009-E The option definition is invalid. Details
HDLM manager cannot start normally (some of
the definition in the option definition file is invalid).
Action
If the KAPL04033-W message is output after this
message, execute dlnkmgr view -sys -
sfunc and check the option settings.
For options with setting values that have returned
to default values, use the dlnkmgr set
operation to reset the values.
If the KAPL04033-W message is not output,
restart HDLM Manager.
If the same error occurs, re-install HDLM. For
details on the view operation, see section 7.7.
For details on the set operation, see section
7.6.
KAPL04010-E Could not open the error log file. Details
HDLM manager cannot start normally (unable to
open the error log file ).
Action
Check whether another program is using the error
log file (or has opened the file with Notepad), or
whether the error log file has been deleted
inadvertently.
KAPL04011-E Could not output the error log file. Details
The log information could not be output to the
error log file.
Action
Check that the disk has sufficient free space.
KAPL04012-E Could not create a communication pipe. RC =
aa...aa
Details
HDLM manager cannot start normally (unable to
create a pipe file to be used in communication
with HDLM commands).
aa...aa : operating system error code (decimal
number)
Action
Execute the DLMgetras utility for collecting
HDLM error information, and then contact your
HDLM vendor or the maintenance company if
there is a maintenance contract for HDLM. For
details on the DLMgetras utility, see section 8.2.