HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 67)

Network management 67
The following table describes the available actions in the Ethernet Settings (Port Monitoring) screen. Clicking
another link in the pull-down menu or left navigation window causes current edits that have not been applied
to be lost.
Task Action
Enable or disable port monitoring Click the drop-down box under Port Monitoring State.
Select a mirror-to port
Click the down arrow in the Add Port box. The current network analyzer
port must be deleted before a new one can be selected.
Change the Network Analyzer
Port speed Click the drop-down box under Speed/Duplex, and then select a setting.
Delete the Network Analyzer Port Click the Delete icon.
View detailed statistics for the
Network Analyzer Port
Click on the Detailed Statistics link.
Add a port to the monitored port
list Click Select Port.... A list of server ports is displayed with checkboxes to
select or deselect the monitored ports.
Clear selections and settings
without saving
Click Clear.
Apply new selections and settings Click Apply.
Clear selections and settings
without saving and return to the
Virtual Connect homepage
Click Cancel.