Interconnect bay summary screen (vc-fc module) – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 172
Hardware information screens 172
Remote Device Information
Description
remote_system_desc
Description of the remote system. If the remote device is a VC-Enet module,
remote_system_desc is the module's hardware description and firmware
revision.
remote_system_capabilities
System capabilities of the remote system, for example, repeater, bridge,
or router.
remote_mgmt_addr_type
Management address subtype of the remote device, for example, IPv4,
IPv6, or DNS.
remote_mgmt_addr
Management address of the remote device.
Interconnect Bay Summary screen (VC-FC Module)
This screen provides a summary of the interconnect module status and port information. To remove a module,
see "Special notes on interconnect module removal and replacement (on page
)."
The following table describes the rows within the Interconnect Bay Status (VC-FC Module) table in the Bay
Summary screen.
Row
Description
Overall Status
Represents the worst condition of OA Reported Status, VC Status, and OA
Communication Status
Hardware Status
Component health status from the Onboard Administrator
- Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem