HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 183)

Hardware information screens 183
Server Bay Status screen
To change the power state of the server blade, click Momentary Press.
To power the server blade on or off, click Press and Hold.
The following table describes the rows within the Server Bay Status table in the Server Bay Status screen.
Server Bay Status
NOTE: Servers connected through VC 8Gb 24-Port FC Modules can take between 15 and 25
seconds to recover from a module uplink port failure.
Row Description
Overall Status Represents the worst condition of Hardware Status, VC Status, and OA
Communication Status
Hardware Status
Component health status from the Onboard Administrator
VC Status Component health status from the Virtual Connect Manager
OA Reported Status Current Virtual Connect Manager to Onboard Administrator communication
state
Assigned Server Profile Name of the profile currently assigned to the server blade in this bay
Enclosure Name Name of the enclosure where this server blade is installed
UID Icon indicates whether the UID is illuminated or not illuminated.