HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 140
Server management 140
b.
Be sure that the Power Status/Control status value is Off. If the status is On, click Momentary Press
to power down the server blade.
2.
Unassign the server profile.
a.
Click the link to the server profile with FCoE connections in the left navigation panel. The Edit Server
Profile screen appears.
b.
In the Assign Profile to Server Bay section, select Unassigned from the Server pull-down list.
c.
Click Apply.
This manual is related to the following products:
- Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem