HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 135
Server management 135
b.
Enter a Fabric Name, and then select an available port of an available bay for the SAN fabric from
the Add Port pull-down list. Select one or more uplink ports for an HP VC FlexFabric 10Gb/24-port
Module.
c.
Be sure that the SAN fabric appears on the SAN Fabrics screen with the appropriate bay and ports
assigned.
3.
Add a server profile for the HP ProLiant BL680c G7 Server Blade.
This manual is related to the following products:
- Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem