Removing a remote enclosure – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 31
Domain management 31
Virtual Connect Manager imports the enclosure and provides status information.
Removing a remote enclosure
To remove a remote enclosure, disassociate all profiles, networks, port sets, and port monitors from the
enclosure. If the enclosure is currently in a No-COMM state, the remote enclosure remains in VC Mode. Take
the enclosure out of VC mode manually with the OA command line for that enclosure.
To remove a remote enclosure:
1.
Go to the Domain Settings (Domain Enclosures) screen (on page
2.
Select the checkbox next to the enclosure to be removed.
3.
Click Delete.
This manual is related to the following products:
- Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem