HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 174)

Hardware information screens 174
The following table describes the rows within the Uplink Port information table in the Bay Summary screen.
Column Description
Port The uplink port number
WWN Either the World Wide Name assigned to the port or the Server Factory
Default, if not assigning WWNs
SAN Fabric Name of the SAN Fabric connected to the uplink port
To edit the SAN Fabric, click the SAN Fabric in the left navigation tree.
Port Speed Speed setting of the uplink port
Connector Status Status of the uplink port
Connected To MAC address of the device that this port is connected to on the other end. The
device must support LLDP to display this information.
The following table describes the rows within the Server Port Information table in the Bay Summary Screen.
Click Less < to display only the Port, Server Blade, SAN Fabric, Connected To, and Profile columns. Click
More > to display all columns.
Column Description
Port Port number
Server Blade Server blade bay location
SAN Fabric Name of the SAN Fabric connected to this port
To edit the SAN Fabric, click the SAN Fabric in the left navigation tree.
Connected To WWN address of the device that this port is connected to on the other end