HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 163)

Hardware information screens 163
Row Description
Overall Status Represents the worst condition of OA Reported Status, VC Status, and OA
Communication Status
Hardware Status Component health status from the Onboard Administrator
VC Status Component health status from the Virtual Connect Manager
OA Communication Status Current Virtual Connect Manager to Onboard Administrator communication
state
Rack Name Name of the enclosure rack (assigned through the Onboard Administrator)
Enclosure Name Name of the enclosure (assigned through the Onboard Administrator)
Bay Number of the bay being summarized on this screen
Power Power state of the device
The following table describes the rows within the Interconnect Bay Information table in the Bay Summary
screen.
Row Description
Part Number
The part number to be used when ordering an additional module of this type
Product Name The common descriptive name of the module
Serial Number The unique serial number of the module
Dip Switch Setting The current physical setting of the system maintenance switches in a
hexidecimal format, where the least significant four bits of the value
correspond to the four switches and a bit value of 1 indicates the switch is in
the "on" position.
Spare Part Number The part number to be used when ordering a replacement module of this type
Manufacturer The manufacturer of the module
Firmware Rev The current firmware revision of the module
The following table describes the columns within the Uplink Port Information table in the Bay Summary
screen.
Column Description
Label Uplink port number
Network(s) Network name or the name of the shared uplink associated with this port
Status Displays whether the port is linked or unlinked
Connector Type Displays the physical type of the faceplate connector, type of pluggable
module if one is present, or "Internal" to indicate the inter-switch link is active
on the VC-Enet module.
LAG ID Identifies the group of ports that have been aggregated together to form an
802.3ad Link Aggregation Group. This ID is unique only within a single
VC-Enet module, meaning the same LAG ID can be used on different VC-Enet
modules, but it is only meaningful for ports within the same VC-Enet module.