HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 173)

Hardware information screens 173
Row Description
VC Status Component health status from the Virtual Connect Manager
OA Communication Status Current Virtual Connect Manager to Onboard Administrator communication
state
Rack Name Name of the enclosure rack (assigned through the Onboard Administrator)
Enclosure Name Name of the enclosure (assigned through the Onboard Administrator)
Bay Number of the bay being summarized on this screen
Power Status Control Power state of the device
Uplink Ports Used Number of uplink ports used to connect to the SAN. This number specifies the
oversubscription ratio (4:1, 8:1, or 16:1).
The following table describes the rows within the Interconnect Bay Information table in the Bay Summary
screen.
Row Description
Part Number
The part number to be used when ordering an additional module of this type
Product Name The common descriptive name of the module
Serial Number The unique serial number of the module
Spare Part Number The part number to be used when ordering a replacement module of this type
Manufacturer The manufacturer of the module
Node WWN
WWN assigned to the module