HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 33)

Domain management 33
If restoring a configuration file that has multiple enclosures, each remote enclosure must be re-authenticated
for security reasons.
For additional information, see "Recovering remote enclosures (on page
23 )."
Domain Settings (Local Users) screen
The first time this screen appears, the only local user account is the Administrator account, which has domain
privileges. The Administrator account cannot be deleted or have domain privileges removed. However, the
Administrator password can be changed. The default Administrator password is identified on the Default
Network Settings label on the Primary VC module. To reset the Administrator password to the factory default,
see the information on resetting the administrator password and DNS settings in the HP Virtual Connect for
c-Class BladeSystem Setup and Installation Guide.
The following tasks can be performed on this screen:
• To create a new local user account, click Add User. The User Settings screen appears.
• To edit attributes of a defined local account, select the user name from this screen.
• To delete a user account, click the Delete icon for that line item, and then click Apply.