HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 43)

Domain management 43
• For Flex-10 connections, threshold and link state change traps reflect the state of the entire physical port.
These traps are not generated for individual FlexNICs. For more information on Flex-10 connections,
see "Flex-10 overview (on page 98 )."
• When upgrading from VC v2.10 to VC v2.3x or higher, the VC 2.10 SNMP configuration is converted
to a comparable VC 2.3x or higher SNMP configuration. If a downgrade is performed from VC 2.3x
to v2.10, the SNMP configuration prior to the v2.3x upgrade is restored. Therefore, any changes made
to the 2.3x SNMP configuration are not reflected in the downgraded v2.10 SNMP configuration.
• When upgrading from a VC release prior to 3.00, if Fibre Channel SNMP traps were defined with the
DNS type of the Trap Destination address, upon completion of the upgrade, SNMP settings are not
applied to the VC-FC modules. As a solution, use the GUI or CLI to edit any FC SNMP trap destinations
that have a DNS name for the trap destination, and change the DNS name to an IPv4 address.
The following table provides a list of MIBs and where they are supported.
MIB VC-Enet VC-FC
RFC 2863 IF-MIB X —
RFC 4188 Bridge-MIB X —
RFC 3418 SNMP v2 MIB X X
Compaq System Info MIB X X
Compaq Host MIB X X
Compaq Rack MIB — X*
Network Mgmt X —
IP-MIB X —
Fibre Alliance MIB (FC Mgmt Integ) — X
Fabric Element MIB — X
VC Module MIB (VCM-MIB) X —
VC Domain MIB (VCD-MIB) X —
* Not supported by the HP 8Gb 24-Port FC module
The VC Module MIB is a VC-specific MIB that describes the state of a specific VC module. In addition to
unique VC module attributes, it defines traps for reporting alerts on port statistics, such as throughput, errors,
and discards. The VC Domain MIB combines domain-wide attributes with traps for state changes in VC
managed objects.
The latest version of the VC-specific MIBs, 8.30b or higher, can be downloaded from the HP Systems Insight
Manager "MIB Kit" site on the HP website
(
http://h18006.www1.hp.com/products/servers/management/hpsim/mibkit.html ).
SNMP traps
The following table provides a summary of the available SNMP traps.
Trap Category Severity MIB
cpqHoSWRunningStatusChangeTrap VCM Legacy Corresponds to the
new value of
cpqHoSWRunningStat
us
CPQHOST-MIB
connUnitStatusChange VC-FC Other INFO FA-MIB
connUnitDeletedTrap VC-FC Other INFO FA-MIB
connUnitEventTrap VC-FC Other INFO FA-MIB