HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 136
Server management 136
a.
Click Server Profiles in the left navigation panel, right-click the Server Profiles list on the Server
Profiles screen, and then select Add.
The Define Server Profile screen appears.
b.
Enter a Profile Name.
c.
If necessary, click Unassigned in the Ethernet Adapter Connections section, and then select an
available network from the pull-down list.
This manual is related to the following products:
- Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem