KROHNE ALTOSONIC V12 EN - Manual (Page 72)

7
SOFTWARE SERVICE TOOL
72
ALTOSONIC V12
www.krohne.com 04/2013 - 4002643502 - MA ALTOSONIC V12 R02 en
Step 3: Step 3: Step 3: Step 3:Type in the box “Logging Home Folder” the name (and path) of the directory where you
want your data to be stored.
7.12 Adjusting parameter settings
A typical adjustment of the parameter setting is the adjustment of the meter factor.
The meter factor is determined during the calibration and is programmed before the ultrasonic
flowmeter is sealed.
Adjustment of the meter factor for Custody Transfer (CT) applications can only be done under the
supervision of a calibration officer. A dedicated procedure for calibration adjustment and
programming the meter is available from KROHNE on request.
Figure 7-51: Settings