KROHNE ALTOSONIC V12 EN - Manual (Page 36)

6
OPERATION
36
ALTOSONIC V12
www.krohne.com 04/2013 - 4002643502 - MA ALTOSONIC V12 R02 en
The nameplate must be sealed to the flowmeter, as shown in the figure below. Alternatively the
nameplate can be welded on the flowmeter or be mounted with rivets, so that removal without
destroying the name plate is not possible.
INFORMATION!
The sealing of the cover is not required and can be broken without affecting the CT approval.
Figure 6-5: Sealing of nameplate