Yokogawa Removable Chassis DX1000N - Manual (Page 94)

Common Operations
IM 04L41B01-01E
2-27
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
2.14 Showing or Hiding the Menu Item for Switching
from Setting Mode to Basic Setting Mode
(Release number 3 or later)
Set whether or not to display a menu item in the setting mode menu for switching to
basic setting mode.
Setup Screen
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > Operating Environment.
Setup Items
• Basic Setting Mode > Menu display
Setting Description
On Displays “Basic setting mode” in the setting mode menu.
Off Basic setting mode is not displayed in the setting mode menu.
Operations
When “Basic setting mode” appears in the setting mode menu, you can perform the
following operation:
1. Press MENU and select the Menu tab > Basic setting mode. Then press DISP/
ENTER.
A confirmation window opens.
2. Select Yes, and press DISP/ENTER.
The basic setting mode menu appears.
Note
Regardless of this setting, you can switch from setting mode to basic setting mode by holding
down the FUNC key for 3 seconds.