Yokogawa Removable Chassis DX1000N - Manual (Page 131)

4-4
IM 04L41B01-01E
4.2 Displaying the Measured Data as Waveforms,
Values, or Bar Graphs
This section explains how to use the trend, digital, and bar graph displays.
For a description of the function, see section 1.3.
Procedure
• Showing the Display
1. Press DISP/ENTER to show the display selection menu.
2. Press the arrow keys to select TREND, DIGITAL, or BAR, and press DISP/
ENTER.
The selected display appears.
• Changing the Displayed Contents
1. Press DISP/ENTER to show the display selection menu.
2. Press the right arrow key to display the sub menu.
3. Press the up and down arrow keys to select the sub menu item.
SCALE ON: Displays the scale
SCALE OFF: Clears the scale
AUTO ZONE ON: Displays trend waveforms
separately by assigning each
channel in the group to separate
display areas (zones)
AUTO ZONE OFF: Does not display waveforms
in zones
ALL CHANNEL: Displays the waveforms of all
channels
GROUP CHANNEL: Displays the waveforms of the
channels registered to groups
DIGITAL OFF: Clears the numeric display
section
DIGITAL ON: Displays the numeric display
section
MESSAGE DISP1: Displays the messages using
display method 1
MESSAGE DISP2: Displays the messages using
display method 2
TREND SPACE ON: Inserts a space at the right
edge (horizontal display) or
the top edge (vertical display)
in the waveform display area
TREND SPACE OFF: Does not insert a space
AUTO SCROLL ON: Automatically switches the
displayed groups
AUTO SCROLL OFF: Does not automatically switch
the displayed groups
Group name: Displays the group
Trend display sub menu
(Not displayed with the default settings.
To display, see section 5.17.)
FINE GRID ON: Displays the fine grid
FINE GRID OFF: Clears the fine grid
TAG DETAIL ON: When a tag does not fit into the
typical tag display space, the
alarm and measured values are
covered so that the tag can be
displayed completely.
TAG DETAIL OFF: Priority is not given to tag display