Yokogawa Removable Chassis DX1000N - Manual (Page 258)

9-14
IM 04L41B01-01E
9.4 Starting/Stopping Computation, Resetting
Computation, and Releasing Computation Data
Dropout Display
Setup Screen
• Action Taken When the START Key Is Pressed
Press MENU (to switch to setting mode), and select the Menu tab > Math channel >
Math start action.
Setup Items
• Math start action > Math start
Settings Description
Off Does not start the computation even when the START key is pressed.
Start Starts the computation when the START key is pressed.
Rst+St Resets the computed result up to then and starts the computation when the
START key is pressed.
Procedure
• Starting the Computation
• Starting the Computation Simultaneously with the Memory Sampling
Press START. Computation starts simultaneously with the start of the memory
sampling. The computation icon appears in the status display section.
* Math start must be set to Start or Rst+St.
• Starting Only the Computation
1. In the operation mode, press FUNC.
The FUNC key menu appears.
2. Press the Math start soft key.
Computation starts, and the computation icon is displayed in the status display section.