Yokogawa Removable Chassis DX1000N - Manual (Page 180)

5-11
IM 04L41B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
5.6 Displaying Channels in Display Zones
Specify a waveform display zone for each channel so that waveforms do not overlap.
For a description of the function, see section 1.3.
Setup Screen
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Zone, Scale
Setup Items
• First-CH, Last-CH
Select the target channels. The target channels are common with the other items that
are displayed on the screen.
• Zone > Lower, Zone > Upper
Sets the zone in which the waveform is displayed. You can set Lower and Upper as
a position (%) when taking the maximum display width to be 100%. Set Upper greater
than Lower, and the zone width (Upper – Lower) greater than or equal to 5%.
Lower: 0 to 95%
Upper: 5 to 100%