Yokogawa Removable Chassis DX1000N - Manual (Page 189)

5-20
IM 04L41B01-01E
5.11 Changing the Bar Graph Display Method
Change the bar graph display method.
For a description of the function, see section 1.3.
Setup Screen
• Display Direction
Press MENU (to switch to setting mode), and select the Menu tab > Display > Bar
graph.
• Base Position and the Number of Scale Divisions
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Bar graph.
Setup Items
• Bar graph > Direction
Set the display direction of bar graphs to Horizontal or Vertical.
• First-CH, Last-CH
Set the target channels. The target channels are common with the other items that are
displayed on the screen.
• Bar graph > Base position
Set the base position of bar graphs to Normal, Center, Lower,* or Upper.*
The setting is applied when displaying the bar graph and when displaying the current
value on the scale using the bar graph.
* You can select Lower and Upper on DXs with release number 2.