Yokogawa Removable Chassis DX1000N - Manual (Page 66)

1-55
IM 04L41B01-01E
Overview of Functions
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
System Display
Displays the total number of inputs on the DX, the size of the internal memory, the
communication functions, the external storage drive, the options, the remote controller
ID, the operation of the devices connected to the USB ports (/USB1 option), the MAC
address, and the firmware version number.
For the operating procedure, see section 2.5.
Language
The displayed language can be set to English, Japanese, German, French, or, Chinese.
For the setting procedure, see section 2.6.
24 VDC Power Supply for Transmitter (/TPS2 or /TPS4 Option)
Provides 24-VDC power supply to up to two (/TPS2) or four (/TPS4) two-wire system
transmitters. The measured values of the transmitter correspond to a current signal of
4 to 20 mA on the same cable. Therefore, the signal can be connected to the DX input
terminal and displayed.
–
+
+
–
Transmitter
Current
DX
Transmitter power
supply output terminal
Input terminal
Shunt resistor: 250 Ω
Easy Text Entry Option (/KB1 and /KB2 Options)
You can control the DX using the keys on the remote control terminal.
• Set the remote controller ID on the DX and the ID number on the remote control
terminal to the same value.
• You can set a value between 0 and 31 for the remote controller ID and ID number.
• By changing the ID number on the remote control terminal, you can control DXs with
different remote controller IDs from a single remote control terminal.
For the operating procedure, see section 2.10.
Light-receiving
section
Infrared signal
output section
DISP/ ENTER
N
1.10 Other Functions