Yokogawa Removable Chassis DX1000N - Manual (Page 105)

Measurement Channels and
Alarms
IM 04L41B01-01E
3-11
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
3.7 Setting Alarms on Channels
Set the alarms after setting the range. All alarm settings of a channel are cancelled in the
following cases.
• When the input type (
Volt, TC, etc.) is changed.
• When the input range is changed.
• When the upper or lower limit of the span or scale is changed on channels that are set
to linear scale, square root computation, or 1-5 V (including changes in the decimal
point position).
Setup Screen
• Alarms for Each Channel
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Range, Alarm.
• Alarm Delay Time
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Tag, Memory, Delay.
On DXs without the /AS1 advanced security option
On DXs with the /AS1 advanced security option