2 displaying tags or channel numbers, 2 displaying tags or channel numbers -3 – Yokogawa Removable Chassis DX1000N User Manual
Page 172
5-3
IM 04L41B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
5.2 Displaying Tags or Channel Numbers
Display the channels using tags or channel numbers. On DX release numbers 3 and
later, tags have tag numbers and tag comments. The tag number is a fixed number that
corresponds to the measurement source. The tag comment can be used to list details
about the channel. You can choose whether or not to use tag numbers.
Setup Screen
• Tag/Channel
Press
MENU (switch to the setting mode), hold down FUNC for 3 s (switch to the
basic setting mode), and select
Environment > Operating Environment.
• Tag Number Use/Not (Release number 3 or later)
Press
MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the
Environment tab > Input, Alarm.
• Tag
Press
MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Tag, Memory, Delay.