Yokogawa Removable Chassis DX1000N - Manual (Page 314)

12-20
IM 04L41B01-01E
Transport and Storage Conditions
Item Specifications
Ambient temperature –25 to 60°C
Ambient humidity 5 to 95%RH (no condensation)
Vibration 10 to 60 Hz, 4.9 m/s 2 maximum
Shock 392 m/s 2 maximum (in packaged condition)
Supported Standards
Item Specifications
CSA CSA22.2 No.61010.1, installation category II *1 , pollution degree 2 *2 , and measurement category II *3
UL UL61010-1 (CSA NRTL/C)
CE
EMC directive EN61326-1 compliance, Class A Table 2
EN61000-3-2 compliance
EN61000-3-3 compliance
EN55011 Class A Group 1
Low voltage directive EN61010-1, installation category II *1 , pollution degree 2 *2 , and measurement category II *3
C-Tick EN55011 compliance, Class A Group 1
*1 Installation category (overvoltage category) II: Describes a number which defines a transient overvoltage condition. Iimplies the regulation for
impulse withstand voltage. “II” applies to electrical equipment which is supplied from the fixed installation like a distribution board.
*2 Pollution degree 2: Describes the degree to which a solid, liquid, or gas which deteriorates dielectric strength or surface resistivity is adhering. “2”
applies to normal indoor atmosphere. Normally, only non-conductive pollution occurs.
*3 Measurement category II: Applies to measuring circuits connected to low voltage installation, and electrical instruments supplied with power
from fixed equipment such as electric switchboards.
12.6 General Specifications