Yokogawa Removable Chassis DX1000N - Manual (Page 174)

5-5
IM 04L41B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
5.3 Setting the Trend Interval and Switching to the
Secondary Trend Interval
Set the trend interval. Switch the trend interval to the secondary trend interval while the
memory sampling is in progress. Automatically write messages when the trend interval is
switched.
For a description of the function, see section 1.3.
Setup Screen
• Switching the Trend Interval and Writing Messages (When Using the
Secondary Trend Interval)
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > View, Message.
• Trend interval [/div] and Secondary interval [/div]
Press MENU (to switch to setting mode), and select the Menu tab > Display > Trend/
Save interval.
Setup Items
• View > Trend rate switching
On: Enables the function that switches the trend interval while the memory sampling
is in progress. The “Second interval [/div]” item is displayed in the setting mode.
* When the trend rate switching function is On, the DX cannot be configured to record both the
display and event data (see section 6.1).
• Message > Change message
On: Writes the time the interval is switched and the new trend interval as a message
when the trend interval is switched.
On DXs with the /AS1 advanced security option, a message is written even when the
setting mode setup items are changed during memory sampling.
Item Message
Alarm setting change AlarmSet
Alarm delay time change AlmDlaySet
Calibration change Calibration correction Setting