Yokogawa Removable Chassis DX1000N - Manual (Page 100)

3-6 IM 04L41B01-01E
3.4 Setting the Moving Average of the Input
Set the moving average function of the measurement channel. This function suppresses
the effects of noise.
For a description of the function, see section 1.1.
Setup Screen
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Moving average.
Setup Items
Average value
Scan Interval
Count
Average value
• First-CH, Last-CH
Select the target channels.
• Moving average > On/Off
To use moving average, select On.
• Moving average > Count
Set the number of data points of the moving average in the range of 2 to 400.