Yokogawa Removable Chassis DX1000N - Manual (Page 169)

4-42
IM 04L41B01-01E
Note
The numbers on the vertical axis of display areas 3 and 4 and the dates on the horizontal
axis are abbreviated.
Display areas 3 and 4 can only display the data from the period immediately preceding that
of display area 1 and 2.
• Selecting a Bar
When SINGLE GRAPH is selected, you can move the cursor to a bar that you want to
check, and view the sums of each channel.
The sums of each channel and the sums of
all channels of the report group at the cursor
position
Cursor
• Power Failure and Time Adjustment Indications
Indicates a power failure
A "C" appears if more than one
report has been filed for the
same time period.
• Power failure
A “P” indicates when a power failure occurred and a report was supposed to be
filed. A “P” also indicates when the DX recovered from a power failure and the next
report was filed.
• Time adjustment
When a time adjustment causes a report to be filed twice because the time was
moved back, the time adjustment is marked with a “C,” and the bar graph of the
report that was filed first is used.
If the data for a period does not exist because of a power failure or time adjustment, a
bar graph for the period will not be displayed.
4.10 Displaying Stacked Bar Graphs (/M1 and /PM1 options; release number 3 or later)