Yokogawa Removable Chassis DX1000N - Manual (Page 184)

5-15
IM 04L41B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
5.8 Displaying Alarm Point Marks and Color Scale
Band on the Scale
Display alarm point marks on the scale. Display the specified range with a color band.
For a description of the function, see section 1.3.
Setup Screen
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Alarm mark or Color scale band.
• Alarm mark • Color scale band
Setup Items
Alarm point mark
Color band
• First-CH, Last-CH
Select the target channels. The target channels are common with the other items that
are displayed on the screen.
• Alarm mark
Displays marks indicating the values of the high and low limit alarms, delay high and
low limit alarms, and difference high and low limit alarms. This setting is common with
the bar graph display.
• Alarm mark > Mark kind
Settings Description Mark
Alarm The alarm mark is green under normal conditions. It changes to the
specified alarm color when an alarm occurs (release number 3 or
later; see section 3.7 for details).
or
Fixed Displays a fixed color.
• Alarm mark > Indicate on Scale
To display alarm point marks, select On.
• Alarm mark color > Alarm 1, Alarm 2, Alarm 3, and Alarm 4
If the Mark kind is set to Fixed, specify the color of the alarm point marks.
If one of the colors under Alarm mark color is set to Auto, its corresponding point
mark will appear in the specified alarm color (release number 3 or later; see section
3.7 for details).