Yokogawa Touch Screen GP20 - Manual (Page 92)

4-4
IM 04L61B01-01EN
4.2 Saving Display Templates
You can save display templates so that you can use them to display data files with the same
conditions on Universal Viewer.
4.2.1 Saving a Display Template
Create a display template that you can use later to show display data files and event data
files.
Procedure
1
Set the display conditions that you want to save as a template.
On the File menu, click Save Template.
A dialog box for saving the template appears.
2.
Click Save.
You can also specify the save destination and file name.
A file with the .tdx extension will be saved.
Note
Display templates will not store file-specific information shown below.
• Cursor A and B data numbers
• Mark information
• Mark note information
4.2.2 Applying a Display Template
Specify a display template that you want to apply when showing display data files and event
data files.
Procedure
1
On the File menu, click Specify Template.
A dialog box for specifying the template appears.
2
Select the template you want to use, and click Open.
The template has been specified.
Note
Specifying the template only selects the template file.
If you want to use it at all times, perform the procedure in “Using a Display Template” (next section).