Yokogawa Touch Screen GP20 - Manual (Page 84)

3-54
IM 04L61B01-01EN
3.10 Converting Data
You can convert measured data, alarms, and other additional information included in display
and event data files to Excel or ASCII format and save them.
Converting a TLOG file ( section 3.7.2 )
3.10.1 Converting Measured Data
Use the Convert Data dialog box to specify the settings for converting the displayed data.
Procedure
1
In the window, display the file that you want to convert and save.
2
On the Convert menu, click Data To.
The Convert Data dialog box appears.
3
Specify the settings for the file conversion.
Specify the start and end data numbers.
The timestamps for the start
and end points
Set data sampling.
Range of data
to convert
Click either
group range or
channel range.
Enter the first and last groups.
Enter the first and last channels.
Select whether to include alarm and mark information.
Select the file format.
Specify the file name and
destination. Number of lines
for dividing
Converted data file name
4
After you finish configuring the settings, click OK.
The data will be converted.
Explanation
Start and End Points
Specify the range of data to convert.
The range specified by cursors A and B are assigned, respectively, to the start and end
points. If you have not set cursors A and B or have cleared them, the start point data number
will be set to zero, and the end point data number will be set to one less than the total
number of data points.
Step
To keep the data after the conversion from becoming too large, you can sample data.
You can specify sampling in steps. To convert all the data in the specified range, set the step
number to 1.