Din rail mounting, Din rail mounting 31, Figure 2.15—tb50 dimensions / clearances 31 – Watlow PPC-2000 User Manual

Page 55

Text mode
Original mode

PPC-2000 User’s Guide

Chapter 2: Hardware Installation

Doc.# 30002-00 Rev 2.3

Watlow Anafaze

Figure 2.15 TB50 Dimensions / Clearances

DIN Rail Mounting

All factory terminal boards snap onto a DIN rail. A TB50 is
shown in the following figures for illustration purposes only.

To install a terminal board on a DIN rail, place the hook side of
the mounting mechanism over one of the DIN rail lips and snap
the board over the other lip.

3.6 in.

2.6 in.

4.2 in.W

3.4 in.

4.1in. L

2.3 in.

(91 mm)

(66 mm)

(102 mm)

(86 mm)

(104 mm)

(58 mm)