Watlow PPC-2000 - Manual (Page 229)

PPC-2000 User’s Guide Chapter 5: LogicPro and Modbus Reference
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 201
Table 5.39 State and Logic
Direction
Select whether the flexible I/O points are being used as inputs
or outputs. All flexible I/O points default to inputs. See Table
5.37 on page 200 for restrictions on particular I/O points.
Table 5.40 Direction
Logic
Specify the active, true level (On state) for each system digital
output.
Table 5.41 Logic
State Value Logic Value Description
0 0(1=On)
Input signal detected or output is
energized
0 1(0=On)
Input signal not detected or out-
put is de-energized
1 0(1=On)
Input signal detected or output is
energized
1 1(0=On)
Input signal not detected or out-
put is de-energized
Value State
0 Input
1 Output
Value State
0 1=On
1 0=On