Watlow PPC-2000 - Manual (Page 39)

PPC-2000 User’s Guide Chapter 2: Hardware Installation
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 15
∫
WARNING! The PPC is designed to operate on 12-28Vdc.
Connection to a power source other than this will
cause damage to the PPC.
To avoid electrical shock, correctly connect the
power supply’s earth ground.
Mounting the Power Supply
Mount the hardware in an area free of moisture or corrosive
chemicals. Mount the power supply vertically with adequate
vent space. Locate the power supply for the PPC such that the
AC supply and DC connections to the PPC may be made. The
PPC-IPS-2 can be DIN rail or screw mounted. Refer to Figure
2.1 for power supply mounting clearances. All dimensions are
measured in inches.
Figure 2.1 PPC-IPS-2 DIN Mounting
Dimensions
1.97 in.
2.5 in. min.
Air Flow Space
V2 COM COM V1 V1
V1 ADJ
L
N
1.2 in.
3.1 in.