Watlow PPC-2000 - Manual (Page 25)

Doc.# 30002-00 Rev 2.3 Watlow Anafaze 1
1
Overview
Manual Contents
This manual describes how to install, set up, and operate a
PPC-2000 controller. Each chapter covers a different aspect of
your control system and may apply to different users. The
following describes each chapter’s purpose.
• Chapter 1: Overview. Provides component list and
summary of features for the PPC-2000.
• Chapter 2: Hardware Installation. Provides detailed
instructions on installing the PPC-2000 system and its
peripherals.
• Chapter 3: Software Setup. Describes how to use your
PPC system with AnaWin3 , the Watlow Anafaze Human-
Machine Interface (HMI) software.
• Chapter 4: Troubleshooting. Includes troubleshooting,
upgrading and reconfiguring procedures for technical
personnel.
• Chapter 5: Custom Interfacing. Provides information
on setting up third-party software or an operator interface
terminal for operating and monitoring a PPC System. Also
provides information needed to address parameters when
writing programs using
LogicPro .
• Chapter 6: Tuning and Control. Describes available
control algorithms and provides suggestions for
applications.
• Chapter 7: Specifications. Lists detailed specifications
of the controller and optional components.