Maple Systems OIT Family - Manual (Page 67)

Configuring the MRR without Enhanced Features
(OIT3100 and OIT4100 Series)
1. From the Configuration menu, choose Message Control Settings. The OIT Message
Control Settings dialog box appears.
2. In the Message Request Register group box, select the Enable check box.
3. In the Message Request Register group box, in the scroll box, specify the PLC
address for the MRR.
4. In the MRR/CMR Data Format group box, specify the data format for the MRR and
CMR.
5. Choose the Done button to return to the OITware-200 main screen.
Configuring the MRR with Enhanced Features
(OIT3100 and OIT4100 Series)
To use a bit position MRR, use multiple MRRs, clear the MRR after each PLC screen
request, or leave the MRR(s) in their existing state on OIT power up, requires the
enhanced features.
1. From the Configuration menu, choose Message Control Settings. The OIT Message
Control Settings dialog box appears.
2. In the Message Request Register group box, select the Enable check box.
3. In the Message Request Register group box, select the Use Enhanced Features check
box. The MRR Editor button activates.
4. Choose the MRR Editor button. The Message Request Register Editor dialog box appears.
Displaying Stored Screens 67
1010-0099, Rev. 07