Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 960)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
Multi Run Project 960
• To get more detailed information about each project file, see readme.txt file in:
(Release folder) …\APIExamples\VC\Test CaptureProject\Readme.txt
Limitation
• In trigger or capture items, only Bus Condition, Protocol Errors, FIS Type, and ATA
command patterns can be added.
• Created project is an Analyzer only project.
• Cannot set port speeds separately (you can set all port speeds to 1.5 GB or 3.0 GB).
Multi Run Project
You can run a series of projects.
General
This example gets a list of capture projects, runs it sequentially, and creates sample files.
This application requires attachment to a board. You must be sure that your board is connected
to your system by USB or TCP.
Specification
• In the first window, enter device ID of board (that is written on hardware case) in
hexadecimal format (for example, 000E85000197), interface (USB or TCP) and product
(SAS).
• Project includes:
o
Added Project List: Shows all projects to run.
o
Output directory: Shows path of created samples.
o
Run All and Stop button: Runs all projects to get samples or stops projects at a time.
o
Sample file name is same as capture project name in an output directory.
• To get more detailed information about each project file, see the readme.txt file in:
(Release folder) …\APIExamples\VC\MultiRunProject\Readme.txt
Limitation
• All added project types must be the same (Analyzer Only or Analyzer/Exerciser).