Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 520)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
IExerciserEngine 520
COMWAKEResponseTimeout The maximum time during SATA speed
negotiation after detecting COMWAKE
Completed before which a PHY starts
transmitting D10.2 characters in
nanoseconds format.
NOTE: Use only in SATA software.
SATASpeedNegotiationFailu Specifies SATA speed negotiation failure
type that is not sending ALIGN or not
sending 3 non ALIGN
(see
SATASpeedNegotiationFailureTypeEnum )
NOTE: Use only in SATA software.
SASSpeedNegotiationFailure Specifies SAS speed negotiation failure
type that is any speed or last window
(see
SASSpeedNegotiationFailureTypeEnum ).
NOTE: Use only in SAS software.
SpeedNegotiationFailure Specifies type of speed negotiation
failure options
(see SpeedNegotiationFailureEnum )
ReceiveIdentifyTimeout Specifies timeout to receive identity in
microsecond format.
NOTE: Use only in SAS software.
SNTTTimer Speed negotiation transmit time (SNTT):
Time during which ALIGN (0) or ALIGN
(1) is transmitted during the speed
negotiation sequence.
NOTE: Use only in SAS software.
SNLTTimer Speed negotiation lock time (SNLT):
Maximum time during a speed
negotiation window for a transmitter to
reply with ALIGN (1).
NOTE: Use only in SAS software.
RCDTTimer Rate change delay time (RCDT):
Time between rates during the speed
negotiation sequence.
NOTE: Use only in SAS software.