Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 204)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ISerialSCSICaptureProject 204
SetProgrammedTimer Sets the timer (based on timer
index) to program or not.
SetProtocolErrorCapturePattern Sets the Protocol error type for an
added Protocol Error capture
pattern.
Note: When added Protocol Error
default Type is SSP, this method
can change the type of the
Protocol Error and parameters for
the Protocol Error.
SetProtocolErrorConditionExprPattern Sets Protocol error type for an
added Protocol Error trigger
pattern (or expression pattern of
a condition).
Note: When added Protocol Error
default Type is SSP, this method
can change the type of the
Protocol Error and parameters for
the Protocol Error.
SetSameCaptureingAsState0 Sets all capture states in
advanced mode to the same as
the first state.
SetSCSICommandCapturePattern Sets the SCSI command type for
an added SCSI command captures
pattern.
Note: When added SCSI
command pattern default Type is
Blank command of MMC, for any
spec type, this method can
change the type of SCSI Command
and parameters for the SCSI
Command.