Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 200)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ISerialSCSICaptureProject 200
SetATACommandConditionExprPattern Sets the ATA Command type for
an added ATACommand trigger
pattern in easy mode or an
expression of a condition in
advanced mode.
SetATACommandConditionExprPatternLBAMode Sets the ATA Command trigger
pattern mode to CHS or LBA in
easy mode or an expression of a
condition in advanced mode.
SetCapturePatternDataOffset Sets the Offset Value for capture
Pattern’s Data pattern if it has a
parameter value.
SetCapturePatternDirection Sets the direction of a capture
pattern.
SetCapturePatternFilter Sets the filter type of the capture
(Include or Exclude).
SetCapturePatternFISDataOffset Sets the Offset Value for Capture
Pattern’s Data if it has a
parameter value.
SetCapturePatternParameterValue Sets the value of a parameter in
the target capture pattern.
SetCapturePatternParameterValueByOptionId Sets the Capture Pattern
Parameter Value (based on
StateId) By Option ID, specified by
its index, and returns the result.
SetCapturePatternSCSICommandType Sets the type of command for an
added SCSI command capture
pattern.
SetCaptureStrategy Sets the strategy of capture.
SetConditionCounter Sets the counter value for a
condition in a state in advanced
mode.
SetConditionExprPatternATAPICommandType Sets the type of command for
added ATAPI command trigger
pattern (or expression pattern of
a condition).