Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 519)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
IExerciserEngine 519
NexusLossTime Contains the time that the exerciser
retries connection requests to an SSP
target port that are rejected, with
responses indicating the SSP target port
may no longer be present before
recognizing an I_T nexus loss.
Table 133 defines the values of the
I_T NEXUS LOSS TIME field.
NOTE: Use only in SAS software.
PatternGeneratorFile Specifies file name for pattern generator,
with an .spg extension.
PrimitiveResponseTimeout Defines the timeout between primitives
in DWORDs.
ResponseTimeout Contains the time in milliseconds that
the initiator waits for the receipt of a
frame (for example, a write DATA frame)
before aborting the command associated
with that frame.
A value of zero indicates that the
initiator disables the response timeout
timer.
NOTE: Use only in SAS software.
SASAddress Shows initiator SAS address.
NOTE: Use only in SAS software.
STPInitiatorALIGNTransmissionPeriod SATA Initiator ALIGN Transmission
Period:
Two consecutive ALIGNs or NOTIFYs
within each 256 dwords, plus one ALIGN
or NOTIFY within each 2048 dwords.
SuppotPowerMng Specifies, when requesting power
management, to accept it (ACK
response) or reject it (NAK response).
NOTE: Use only in SATA software.
COMWAKEReceiveTimeout Specifies timeout for COMWAKE receive
in microsecond format.
NOTE: Use only in SATA software.