Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 394)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
IExerciserEngine 394
SetSATASelfTestInstructionField Sets field value of a SATA self-test
instruction.
SetSATASelfTestInstructionFieldByOp
tion
Sets field value by option ID of a SATA
self-test instruction.
SetSATASelfTestInstructionFieldData Sets field data of a SATA self-test
instruction.
SetSATASoftResetInstructionPort Sets port value of a soft reset
instruction.
SetSATAWakeupInstructionOOBType Sets OOB type of a wakeup
instruction.
SetTaskAttribute Sets Task Attribute value of a packet
object.
SetTriggerSource Sets type of trigger
(see TriggerSourceEnum )
SetWaitForHandshake Sets TRUE if wait for handshake was
selected.
(only for SSP transport frame.)
SetWaitForInstructionLableId Sets label ID of Wait For any frame
instruction.
SetWaitForInstructionTimeExpiration Sets expiration time of Wait For any
frame instruction that must be
jumped after that time if it does not
receive a frame.
SetCurrentProgramId
You can program each port speratley in attention
to Port configuration. To change the active port to
program, you must call this function first before
calling other functions of initiator to program the
port.
GetCurrentProgramId
You can program each port speratley in attention
to Port configuration. This function returns the
current port of programming in initiator.